Housing Material
Glass-Filled Polypropylene
Design
Gravity-feed, Requires the Pump Inlet to be Lower than Liquid Level
Motor Enclosure
Open Fan Cooled
Temp. @ 0 psig
150 Degrees F
GPM of Water @ 3 Ft. of Head
2.1 gpm
Temp. @ 10 psig
120 Degrees F
Application
For Photographic and Plating Solutions, Mild Acids, Mild Alkalis and Other Nonflammable Liquids Compatible with Pump Component Materials, Eliminates Seal-Caused Friction Loss, Wear, Contamination and Leakage
Temp. @ 30 psig
70 Degrees F
Temp. @ 20 psig
90 Degrees F
Impeller Material
Glass-Filled Polypropylene
Feet of Head (Maximum)
5.4 ft
Flow Rate @ 50 ft of Head (Maximum)
Not Applicable
Flow Rate @ 40 ft of Head (Maximum)
Not Applicable
Discharge Pipe Size
1/2 in
Specific Gravity (Maximum)
1.1
Flow Rate @ 9 ft of Head (Maximum)
Not Applicable
Ambient Temperature (Maximum)
77 Degrees F
Flow Rate @ 18 ft of Head (Maximum)
Not Applicable
Horsepower (Maximum)
1/200 hp
Flow Rate @ 6 ft of Head (Maximum)
Not Applicable
Motor Mounting Type
Horizontal
Viscosity (Maximum)
100 SUS
Media Temperature (Maximum)
150 Degrees F
Flow Rate @ 3 ft of Head (Maximum)
1.7 gpm
Operating Pressure (Maximum)
2.33 psi
Flow Rate @ 24 ft of Head (Maximum)
Not Applicable
Manufacturers Warranty Length
1 yr
Flow Rate @ 15 ft of Head (Maximum)
Not Applicable
Country of Origin (subject to change)
Mexico
