Promotion Restriction
Not eligible for promotion
Includes
(4) Passive Probes, Power Cord, USB Cable
Features
A Built-In DDS Waveform Generator Outputs Waveforms with Maximum Frequencies of 50 MHz and +/-3 V Amplitude., Optional MSO Feature Adds 16 Digital Channels Allowing the Acquisition and Triggering of Mixed Signal Waveforms., Serial Bus Decoding Supports I2C, SPI, UART, CAN, and LIN Protocols., Sine, Square, Ramp, Pulse, Noise, DC and Arbitrary Waveforms are Available., USB (USBTMC-Compliant) and LAN Interfaces Included.
Display
10.1 in (1024 x 600) Capacitive; Touchscreen LCD Display
Input Sensitivity
1 M Ohms: 500 micron V/div to 10 V/div; 50 Ohms: 500 micron V/div to 1 V/div
Glitch Capture
1 ns Peak Detect on Each Channel
Safety Rating
CAT I, 400 Vpk max
Sampling Rate
1 GSa/s (Non-Interleaving Mode), 2 GSa/s (Interleaving Mode)
FFT Analysis
FFT Analysis with Selectable Memory from 2 kpts of 2 Mpts
Persistence
Off, 1s, 5s, 10s, 30s, infinite
Waveform / Measurement Stored
Store and Recall Waveform Data, Setups and Screenshots on a USB Flash Drive., History Mode Can Store up to 90,000 Triggered Waveforms.
Manufacturers Warranty Length
3yr
Max./Min. Sweep Speed
1 ns/div to 1000 s/div
Calibration Certificate
Yes
Cursors u0026 Zoom
Ranges From Full Record Overview To Zoom In Up To Sample Level At Any Record Length
Max. Record Length
200 Mpts/ch; 100 Mpts/ch
Cursors and Zoom
Ranges From Full Record Overview To Zoom In Up To Sample Level At Any Record Length
AC Current Measurement - Maximum
Not Applicable
Memory Depth
100 Mpts/Ch (Non-Interleaving Mode); 200 Mpts/Ch (Interleaving Mode)
CAT Safety Rating
CAT I 400V
DC Current Measurement - Maximum
Not Applicable
Display Screen Length
10.1 in
Time Base - Maximum
1,000 sec/div
Digital Display Screen Type
TFT LCD
Capacitance Measurement - Maximum
Not Applicable
AC Magnitude Calculation
True RMS
Input Sensitivity - Minimum
500 uV/div
DC Current Measurement - Minimum
Not Applicable
Channel Source Isolation
Non-Isolated
AC Voltage Measurement - Minimum
10 mV AC
AC Voltage Measurement - Maximum
400 V AC
Input Sensitivity - Maximum
10 V/div
DC Voltage Measurement - Maximum
400 V DC
Capacitance Measurement - Minimum
Not Applicable
Calibration Certificate Type
NIST
Sound Level Measurement - Maximum
40 dB
Time Base - Minimum
1 nsec/div
Standards
Certificate Number 6Z241-IS8, Certification Body NSF-ISR, ISO 9001:2015
AC Current Measurement - Minimum
Not Applicable
DC Voltage Measurement - Minimum
10 mV DC
Country of Origin (subject to change)
China