Includes
Non-Expansion M2000 Spherical Roller Bearing
Temp. Range
-40 Degrees to 250 Degrees F
Dynamic Load Capacity
17,300 lb
Static Load Capacity
19,800 lb
Shaft Locking Type
Set Screws
Bearing Housing Material Type
Cast Iron
Bolt Hole Center-to-Center
5 13/16 in
Bearing Lubrication
Lithium Complex Grease
Bearing Insert Type
Spherical Roller
Mounting Surface to Shaft Center
2 1/8 in
Bearing Insert Material
Alloy Steel
Static Radial Load Capacity
19,800 lbf
Maximum Misalignment Angle
5.5 Degrees
Dynamic Axial Load Capacity
17,300 lbf
Included Bearing
Non-Expansion M2000 Spherical Roller
Mount Hole Center-to-Center Length
5 1/2 in
Features
+/-11/2 Degrees Misalignment Capacity, Assembled, Adjusted and Pre-Lubricated in Advance for Immediate Use, Built with Skf(TM) and Timken(TM) Spherical Roller Bearings, Expansion Units have .100 in Capacity, Piloted Flange Housings are Machined with Back-Out Holes, Precision Ground Contours, Rotating Center Guide Ring for Least Possible Friction, Single Piece Outer Race is Grooved and has 3 Lube Holes for Even Distribution of Grease), Standard Units have One Locking Collar, Timken(TM) Lithium Complex Grease Operating Temperature is up to 250 Degrees , High Temperature Grease is Available up to 350 Degrees , will Accommodate Moderate Thrust Loads and Permits Angular Misalignment without Loss of Capacity
Application
Air Handling, Conveying, Food Processing, Paper and Forestry, Screening
Lubricant Material
Lithium Grease
Maximum Temperature
250 Degrees F
System of Measurement
Inch
Bearing Material Grade
52100
Housing Material
Cast Iron
Minimum Temperature
-40 Degrees F
Country of Origin (subject to change)
United States
