Accuracy
+/-1% of Full Scale
Electrical Connections
3-Pin Packard Connector
Features
1% Total Error Band, Environmentally Protected Electronics, Long Operating Life, Single-Piece Machined Port
Housing
17-4PH Stainless Steel Construction
Safety Rating
Class I Div. 2
Electrical Connections - Transmitter
Packard Connector with 6-1/2 ft Wiring Harness
Compatible With
All Media Compatible with 17-4PH Stainless Steel, Including Ammonia
Process Connection
1/4 in Male SAE 45 Degrees Flare
Operating Temp. - Transmitter
-40 Degrees to 185 Degrees F
Accuracy - Transmitter
+/-1.00%
Process Connection Type - Transmitter
SAE Flare Internal Thread
Transmitter Type
Pressure Transmitter
Range Units - Transmitter
psi
Wiring Entry - Transmitter
None
Output - Transmitter
0.5 to 4.5V DC
For Use With
Any Corrosive or Non-Corrosive Pressure Medium That is Compatible With 17-4PH Stainless Steel, Including Water, Condensate, Carbon Dioxide, Glycol, Most Refrigerants Including Ammonia, and Many Other Compatible Fluids and Gases
Operating Temp.
-40 to 185 Degrees F
Process Connection Size - Transmitter
1/4 in
Power Required - Transmitters
5V DC
Calibration Certificate
No
Wetted Materials
17-4PH Stainless Steel Construction
Range Values - Transmitter
0 to 500
Loop Resistance
Minimum Between Transducer Body and Any Wire, 100 megaohm @ 500 V DC
Wetted Materials - Transmitters
17-4PH Stainless Steel
Safety Rating - Transmitter
Class I, Div. 2, Groups A, B, C, D
NEMA Rating
7 - Class 1, Division 2, Groups A, B, C, and D
Manufacturers Warranty Length
3 yr
Includes
6 1/2 Ft (2 m) Wire Harness, Transducer
For Use With Media Type
Ammonia, Carbon Dioxide, Condensate, Fluids, Gas, Glycol, Refrigerants, Water
Electrical Connection
3-Pin Packard Connector
Maximum Loop Resistance
100 Mega Ohm @ 500V DC
Housing Material
Stainless Steel
Calibration Certificate Included
No
Minimum Operating Temperature
-40 Degrees F
Maximum Operating Temperature
185 Degrees F
Process Connection Size
1/4 in
NIST Traceable Certificate
No
Process Connection Gender
Male
Fitting Material
Stainless Steel
Storage Temperature Range
-40 Degrees F to 257 Degrees F (-40 Degrees C to 125 Degrees C)
Process Connection Type
SAE 45 Degrees Flare
Includes NIST-Traceable Calibration Certificate
No NIST-Traceable Calibration Certificate Included
NEMA Enclosure Rating
Not Applicable
Hazardous Location Specification
Not Applicable
Process Media Temperature - Minimum
-40 Degrees F
Process Media Temperature - Maximum
185 Degrees F
Loop Resistance - Maximum
100 Mega Ohm @ 500V DC
Pressure Measurement - Minimum
0 psi
Output Power
0.5 to 4.5V DC
Pressure Measurement - Maximum
500 psi
Intrinsic Safety
Not Specified Intrinsically Safe
Pressure Type Measured
Gauge
Country of Origin (subject to change)
China
