Accuracy
+/-1% of Full Scale
Electrical Connections
3-Pin Packard Connector
Features
1% Total Error Band, Environmentally Protected Electronics, Long Operating Life, Single-Piece Machined Port
Housing
17-4PH Stainless Steel Construction
Safety Rating
Class I Div. 2
Housing Material
Stainless Steel
Wetted Materials - Transmitters
17-4PH Stainless Steel
Process Connection Type
NPT
Process Connection Size - Transmitter
1/8 in
Compatible With
All Media Compatible with 17-4PH Stainless Steel, Including Ammonia
Max. Pressure (PSI)
200 psi
Process Connection Type - Transmitter
MNPT
Minimum Operating Temperature
-40 Degrees F
Fitting Material
Stainless Steel
Range Units - Transmitter
psig
Process Connection Gender
Male
Operating Temp. - Transmitter
-40 Degrees to 185 Degrees F
Manufacturers Warranty Length
3 yr
Storage Temperature Range
-40 Degrees F to 257 Degrees F (-40 Degrees C to 125 Degrees C)
NEMA Rating
9 - Class 1, Division 2, Groups A, B, C, and D
Operating Temp.
-40 Degrees to 185 Degrees F
For Use With
Any Corrosive or Non-Corrosive Pressure Medium That is Compatible with 17-4PH Stainless Steel, Including Water, Condensate, Carbon Dioxide, Glycol, Most Refrigerants Including Ammonia, and Many Other Compatible Fluids and Gases
For Use With Media Type
Ammonia, Carbon Dioxide, Condensate, Fluids, Gas, Glycol, Refrigerants, Water
Maximum Operating Temperature
185 Degrees F
Transmitter Type
Pressure Transmitter
Process Connection
1/8 in Male NPT
Power Required - Transmitters
5V DC
Process Connection Size
1/8 in
Range Values - Transmitter
0 to 100
Wiring Entry - Transmitter
None
Accuracy - Transmitter
+/-1.00% Full Scale
Safety Rating - Transmitter
Class I, Div. 2, Groups A, B, C, D
Maximum Loop Resistance
100 Mega Ohm @ 500V DC
Electrical Connections - Transmitter
Packard Connector
Electrical Connection
3-Pin Packard Connector
Loop Resistance
Minimum Between Transducer Body and Any Wire: 100 megaohm @ 500V DC
Output - Transmitter
0.5 to 4.5V DC
Wetted Materials
17-4PH Stainless Steel Construction
Loop Resistance - Maximum
100 Mega Ohm @ 500V DC
Intrinsic Safety
Not Specified Intrinsically Safe
Pressure Measurement - Minimum
0 psi
Pressure Measurement - Maximum
100 psi
NEMA Enclosure Rating
Not Applicable
Process Media Temperature - Maximum
185 Degrees F
Includes NIST-Traceable Calibration Certificate
No NIST-Traceable Calibration Certificate Included
Output Power
0.5 to 4.5V DC
Hazardous Location Specification
Not Applicable
Process Media Temperature - Minimum
-40 Degrees F
Pressure Type Measured
Gauge
Country of Origin (subject to change)
China
