Includes
6 1/2 Ft (2 m) Wire Harness, Transducer
Operating Temp.
-40 Degrees to 185 Degrees F
Storage Temperature Range
-40 Degrees F to 257 Degrees F (-40 Degrees C to 125 Degrees C)
For Use With Media Type
Ammonia, Carbon Dioxide, Condensate, Fluids, Gas, Glycol, Refrigerants, Water
Accuracy
+/-1% of Full Scale
Housing Material
Stainless Steel
Process Connection
1/4 in Male SAE 45 Degrees Flare
Electrical Connection
3-Pin Packard Connector
Fitting Material
Stainless Steel
Process Connection Size
1/4 in
Output - Transmitter
4 to 20mA DC
Process Connection Size - Transmitter
1/4 in
Maximum Loop Resistance
100 Mega Ohm @ 500V DC
Operating Temp. - Transmitter
-40 Degrees to 185 Degrees F
Max. Pressure (PSI)
1,000 psi
Process Connection Type
SAE 45 Degrees Flare
Transmitter Type
Pressure Transmitter
Safety Rating
Class I Div. 2
Wiring Entry - Transmitter
None
Minimum Operating Temperature
-40 Degrees F
Process Connection Gender
Male
Maximum Operating Temperature
185 Degrees F
Process Connection Type - Transmitter
SAE Flare Internal Thread
Features
1% Total Error Band, Environmentally Protected Electronics, Long Operating Life, Single-Piece Machined Port
Power Required
9 to 30V DC
For Use With
Any Corrosive or Non-Corrosive Pressure Medium That is Compatible with 17-4PH Stainless Steel, Including Water, Condensate, Carbon Dioxide, Glycol, Most Refrigerants Including Ammonia, and Many Other Compatible Fluids and Gases
NEMA Rating
7 - Class 1, Division 2, Groups A, B, C, and D
Manufacturers Warranty Length
3 yr
Wetted Materials
17-4PH Stainless Steel Construction
Loop Resistance
Minimum Between Transducer Body and Any Wire: 100 megaohm @ 500V DC
Safety Rating - Transmitter
Class I, Div. 2, Groups A, B, C, D
Electrical Connections - Transmitter
Packard Connector with 6-1/2 ft Wiring Harness
Wetted Materials - Transmitters
17-4PH Stainless Steel
Range Units - Transmitter
psig
Electrical Connections
3-Pin Packard Connector
Range Values - Transmitter
0 to 500
Accuracy - Transmitter
+/-1.00% Full Scale
Compatible With
All Media Compatible with 17-4PH Stainless Steel, Including Ammonia
Power Required - Transmitters
12 to 30V DC
Housing
17-4PH Stainless Steel Construction
Process Media Temperature - Maximum
185 Degrees F
Pressure Type Measured
Gauge
Hazardous Location Specification
Not Applicable
Loop Resistance - Maximum
100 Mega Ohm @ 500V DC
NEMA Enclosure Rating
Not Applicable
Pressure Measurement - Minimum
0 psi
Intrinsic Safety
Not Specified Intrinsically Safe
Includes NIST-Traceable Calibration Certificate
No NIST-Traceable Calibration Certificate Included
Process Media Temperature - Minimum
-40 Degrees F
Pressure Measurement - Maximum
500 psi
Country of Origin (subject to change)
China
