Contact Form - Relay
1 C/O
Mounting - Relay
35 mm symmetrical DIN rail conforming to EN/IEC 60715
Power Consumption - Relay
1 W; 0-3 VA
Body Width - Relay
17.5 mm
Features
For Power On LED (Green); For Relay On LED (Yellow); Non Reversible Polarity On Dc Supply; Overvoltage Or Undervoltage Detection; Self-Powered
Standards
EN/IEC 60255-6; GL; UL; GOST; CSA; C-tick; CE
Operating Temp. Range
-20-50°C
Switching Voltage
250 V AC/DC
Pollution Degree
3 IEC 60664-1
Electromagnetic Compatibility
Emission standard for industrial environments conforming to IEC 61000-6-4; Emission standard for residential, commercial and light-industrial environments conforming to IEC 61000-6-3; Immunity for industrial environments conforming to NF EN/IEC 61000-6-2
Immunity To Microbreaks
20 ms
Measurement Accuracy
+/- 10% of the full scale value
Measurement Error
Less than 1% over the whole range with voltage variation; 0.2%/°C with temperature variation
Polarity
Non reversible polarity on DC supply
Maximum Switching Current
5 A AC/DC
Ambient Air Temperature For Operation
-4 to 122°F (-20 to 50°C)
Repeat Accuracy
+/- 0.5% input and measurement circuit; +/- 1% time delay
Ambient Air Temperature For Storage
-40 to 158°F (-40 to 70°C)
Nominal Output Current
5 A
Relative Humidity
95% 131°F (55°C) IEC 60068-2-30
Delay At Power Up
1000 ms DC; 500 ms AC
Product Certifications
GL; UL; GOST; CSA; C-tick
Utilisation Category
AC-12 IEC 60947-5-1; AC-13 IEC 60947-5-1; AC-14 IEC 60947-5-1; AC-15 IEC 60947-5-1; DC-12 IEC 60947-5-1; DC-13 IEC 60947-5-1; DC-14 IEC 60947-5-1
Maximum Measuring Cycle
150 ms measurement cycle as true rms value
Dielectric Test Voltage
2 kV AC 50 Hz, 1 min IEC 60255-5; 2 kV AC 50 Hz, 1 min IEC 60664-1
Supply Voltage Limits
50 to 270 V AC/DC
Connections - Terminals
Screw terminals, 1 x 0.5 to 1 x 4 mm² AWG 20 to AWG 11) solid without cable end; Screw terminals, 2 x 0.5 to 2 x 2.5 mm² AWG 20 to AWG 14) solid without cable end; Screw terminals, 1 x 0.2 to 2 x 2.5 mm² AWG 24 to AWG 12) flexible with cable end; Screw terminals, 2 x 0.2 to 2 x 1.5 mm² AWG 24 to AWG 16) flexible with cable end
Reset Time
1500 ms time delay
Overvoltage Category
III IEC 60664-1
Rated Insulation Voltage
250 V IEC 60664-1; 400 V IEC 60664-1
Measurement Range
65 to 260 V voltage AC 50/60 Hz; 65 to 260 V voltage DC
Maximum Power Consumption in W
1 W DC
Non-Dissipating Shock Wave
4 kV IEC 60255-5; 4 kV IEC 60664-1; 4 kV IEC 61000-4-5
Local Signalling
for power ON LED (green); for relay ON LED (yellow)
Tightening Torque
5.31 to 8.85 lbf.in (0.6 to 1 N.m) IEC 60947-1
Product Or Component Type
Voltage control relay
Control Circuit Frequency
50 to 60 Hz +/- 10%
Relay Monitored Parameters
Overvoltage or undervoltage detection; Self-powered
Electrical Durability
100000 cycles
Power Consumption in VA
0 to 3 VA AC
IP Degree Of Protection
IP20 IEC 60529 terminals; IP30 IEC 60529 casing)
Product Specific Application
For single-phase and DC supply
Minimum Switching Current
10 mA 5 V DC
Operating Position
Any position without derating
Vibration Resistance
0.35 mm 5 to 57.6 Hz)IEC 60068-2-6; 1 gn 57.6 to 150 Hz)IEC 60255-21-1
Insulation Resistance
Greater than 500 MOhm 500 V DC IEC 60255-5; Greater than 500 MOhm 500 V DC IEC 60664-1
Time Delay
Adjustable 0.1 to 10 s, 0 + 10% on crossing the threshold
Mounting Support
35 mm symmetrical DIN rail conforming to IEC 60715
Mechanical Durability
30000000 cycles
Operating Rate
Less than or Equal to 360 operations/hour full load
Housing Material
Self-extinguishing plastic
Shock Resistance
5 gn IEC 60068-2-27
Rated Supply Voltage
110 to 240 V AC/DC 50/60 Hz +/- 10%
Hysteresis
5 to 20% threshold setting
Relay Type
Voltage control relay
Status Indicator
No Indicator
Country of Origin (subject to change)
Indonesia
